sic schottky barrier diode scs110ag ? applications ? dimensions (unit : mm) ? structure switching power supply ? features 1)shorter recovery time 2)reduced temperature dependence 3)high-speed switching possible ? construction silicon carbide epitaxial planer type ? absolute maximum ratings (tj=25c) symbol unit v rm v v r v i f a a a i frm a total power disspation p d w tj c tstg c junction to case rth(j-c) c / w ? electrical characteristics (tj=25c) symbol min. typ. max. unit v dc 600 - - v i r =0.2ma -1.51.7 vi f =10a,tj=25c -1.82- vi f =10a,tj=175c - 2 200 av r =600v,tj=25c -40- av r =600v,tj=175c - 430 - pf v r =1v,f=1mhz -47- pfv r =600v,f=1mhz qc - 16 - nc v r =400v,di/dt=350a/ s tc - 15 - ns v r =400v,di/dt=350a/ s i r total capacitance c total capacitive charge switching time ? 55 to ? 175 1.8 (*1)tc=134c (*2)pw=8.3ms sinusoidal,tj=25c (*3)pw=10 ? s square,tj=25c (*4)tc=100c,tj=150c,duty cycle=10% (*5)tc=25c reverse current conditions dc blocking voltage parameter limits reverse voltage (repetitive peak) 600 reverse voltage (dc) 600 continuous forward current 10* 1 40* 2 160* 3 surge no repetitive forward current i fsm repetitive peak forward current 42* 4 83* 5 junction temperature 175 range of storage temperature parameter forward voltage v f rohm : o-220ac 1/3 2012.09 - rev.c data sheet www.rohm.com ? 2012 rohm co., ltd. all rights reserved.
scs110ag ? electrical characteristic curves (ta=25 ?c) 0.001 0.01 0.1 1 10 100 0 200 400 600 reverse current ( a) reverse voltage: v r (v) ta= 125 ta= 75 ta=-25 ta= 25 ta= 175 1 10 100 1,000 0.01 0.1 1 10 100 1000 capacitance between terminals : ct [pf] reverse voltage : v r [v] ta=25 f=1mhz 0 2 4 6 8 10 12 14 0.0 0.5 1.0 1.5 2.0 2.5 forward current: i f (a) forward voltage : v f (v) ta= 125 ta= 75 ta=-25 ta= 25 pulsed ta= 175 fig.2 v f -i f characteristics 0.001 0.01 0.1 1 10 100 0.0 0.5 1.0 1.5 2.0 2.5 forward current: i f (a) forward voltage : v f (v) ta= 125 ta= 75 ta=-25 ta= 25 pulsed ta= 175 fig.1 v f -i f characteristics fig.3 v r -i r characteristics fig.4 v r -ct characteristics fig.5 thermal resistance vs pulse width fig.6 power dissipation 0 10 20 30 40 50 60 70 80 90 0 25 50 75 100 125 150 175 power dissipation (w) case temperature : tc ( ) 0.01 0.1 1 10 0.0001 0.001 0.01 0.1 1 10 100 1000 thermal resistance : /w pulse width : pw s ta=25 single pulse 2/3 2012.09 - rev.c www.rohm.com ? 2012 rohm co., ltd. all rights reserved. datasheet
scs110ag fig.7 derating curve ip-tc fig.8 io-pf characteristics 0 10 20 30 40 50 60 0 25 50 75 100 125 150 175 peak forward current (a) case temperature tc ( ) d.c . duty=0.1 duty=0.2 duty=0.5 duty=0.8 0 10 20 30 40 50 0 5 10 15 20 power dissipation (w) average rectified forward current : io (a) d.c. duty=0.8 duty=0.5 duty=0.2 duty=0.1 3/3 2012.09 - rev.c www.rohm.com ? 2012 rohm co., ltd. all rights reserved. datasheet
r1120a www.rohm.com ? 2012 rohm co., ltd. all rights reserved. notice rohm customer support system http://www.rohm.com/contact/ thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. notes no copying or reproduction of this document, in part or in whole, is permitted without the consent of rohm co.,ltd. the content specified herein is subject to change for improvement without notice. the content specified herein is for the purpose of introducing rohm's products (hereinafter "products"). if you wish to use any such product, please be sure to refer to the specifications, which can be obtained from rohm upon request. examples of application circuits, circuit constants and any other information contained herein illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when design ing circuits for mass production. great care was taken in ensuring the accuracy of the information specified in this document. however, should you incur any damage arising from any inaccuracy or misprint of such information, rohm shall bear no responsibility for such damage. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the produc ts. rohm does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm and other parties. rohm shall bear no responsibility whatsoever for any dispute arising from the use of such technical information. the products specified in this document are intended to be used with general-use electronic equipment or devices (such as audio visual equipment, office-automation equipment, commu- nication devices, electronic appliances and amusement devices). the products specified in this document are not designed to be radiation tolerant. while rohm always makes efforts to enhance the quality and reliability of its products, a product may fail or malfunction for a variety of reasons. please be sure to implement in your equipment using the products safety measures to guard against the possibility of physical injury, fire or any other damage caused in the event of the failure of any product, such as derating, redundancy, fire control and fail-safe designs. rohm shall bear no responsibility whatsoever for your use of any product outside of the prescribed scope or not in accordance with the instruction manual. the products are not designed or manufactured to be used with any equipment, device or system which requires an extremely high level of reliability the failure or malfunction of which may result in a direct threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel- controller or other safety device). rohm shall bear no responsibility in any way for use of any of the products for the above special purposes. if a product is intended to be used for any such special purpose, please contact a rohm sales representative before purchasing. if you intend to export or ship overseas any product or technology specified herein that may be controlled under the foreign exchange and the foreign trade law, you will be required to obtain a license or permit under the law.
|
